Stainless steel high-strength chemical anchor is a name that is classified according to the material of the screw. In fact, it is also a type of chemical anchor. It is only distinguished by material and named as stainless steel high-strength chemical anchor.
However, the use of stainless steel for high-strength chemical anchors is also differentiated by types, and 304 stainless steel and 316 stainless steel are commonly used. Based on the characteristics of these two different types of stainless steel, we found through experimental comparison that in practical applications, 316 stainless steel high-strength chemical anchor bolts have better corrosion resistance than 304 stainless steel high-strength chemical anchor bolts. In addition, its working principle is the same as other types of chemical anchors, and it is also necessary to fix the screw in the hole of the base material through a special chemical adhesive, so as to realize the anchoring of the fixing member.
So, what other aspects should we pay special attention to during the installation process?
First of all, when drilling the substrate, we need to implement the drilling step according to the parameters given by the requirements, and the drilling deviation should be maintained within the specified range. Secondly, when installing stainless steel high-strength chemical anchor bolts, pay attention to keeping the surface of the anchor bolt fixing part clean and tidy, and after putting the glass hose into the anchor hole, the speed of the electric hammer should be carried out at a low speed, and the screw should be slowly rotated. It stops when it reaches the anchoring depth, and it is qualified if a small amount of glue overflows visually. In addition, if the anchor bolt is not installed immediately during the installation process, remember to temporarily close the hole to prevent dust, debris, etc. from falling into the hole, so as to avoid affecting the quality of the anchorage.
In fact, we should not only pay attention to the material selection of stainless steel high-strength chemical anchor bolts, but also pay attention to these subtleties during construction, so that the ideal anchoring effect can be achieved with a standardized, scientific and rigorous construction method.
shellyn-anchor.com